Blog / dose log
Injection Tracker: Why Logging Every Shot Matters, and What to Log
A practical injection tracker guide: why logging every shot helps, what to record for pens and vials, and the tracking mistakes to avoid.
By Peppy Team6 min read
If you give yourself injections at home, you already know the routine: check the pen or vial, draw or dial the dose, pick a spot, inject, put the needle in the sharps container. What often gets skipped is the last step that makes all the others easier to repeat. Writing it down.
An injection tracker is simply a record of every shot you take. It can be a notebook, a spreadsheet or a peptide tracker app. The tool matters less than the habit. This guide covers why logging every shot is worth the ten seconds, and exactly what to log so the record is useful to you and your provider.
Why logging every shot matters
It stops the "did I already take it?" moment
Most people have stood in the kitchen trying to remember whether they took this week's shot on Sunday or only meant to. With a weekly GLP-1 or an every-few-days peptide, the gaps are long enough that memory fails. A log answers the question in a second. That matters, because guessing wrong can mean a missed dose or a doubled one.
It catches measuring mistakes
Measuring errors are a real problem with injections drawn from a vial. The FDA has said it received reports of adverse events that may be related to dosing errors with compounded semaglutide, where patients measured the wrong amount and, in some cases, a health care professional miscalculated the dose. Some of those reports involved hospital care.
A log will not prevent every mistake. It does make one visible. If your entries show 20 units every week and then a week shows 40, you notice before it becomes a habit.
It makes site rotation possible
Rotation depends on knowing where you went last. MedlinePlus advises people who inject insulin to keep a chart of the places they have used so they do not inject in the same spot every time, and to avoid spots that are bruised, swollen, tender, lumpy or firm. The same logic applies to any routine injection. Without a record, "rotation" usually turns into the same two favorite spots.
It gives your provider real data
Your provider makes the decisions about your treatment. They can only work with what you tell them. "I think I took most of them" is hard to act on. A list of dates, doses and notes is easy to act on.
What to log for every injection
Keep the entry short enough that you will do it every single time. These fields cover almost every situation.
The core entry
- Date and time. The actual time you injected, not the time you planned to.
- What you injected. The medication or peptide name, written the same way every time.
- Dose. The dose your provider gave you, in the unit they used (mg or mcg).
- How you measured it. Units drawn on the syringe, or the dose shown on the pen.
- Injection site. For example, left abdomen, right thigh or back of left arm.
Helpful extras
- Which pen or vial. Useful when you have more than one open.
- Anything unusual. A bent needle, a leak at the site, a dose taken late or a shot you skipped.
- How you feel. One or two short notes, rated the same way each time, such as nausea on a 0 to 10 scale.
Missed doses deserve their own entry. Write "missed" with the date instead of leaving a blank. A gap in the log looks the same whether you forgot to take the shot or forgot to write it down.
Pens and vials need slightly different records
Prefilled pens
With a prefilled pen, the pen sets the amount. Your log mainly needs the dose shown, the date and the site. It also helps to note when you started a new pen, so you can see how many doses are left and when you will need the next one.
Vials and syringes
With a vial, you do the measuring, so the record needs more detail. Log the vial strength, the amount of water mixed in if it came as a powder, and the units you drew. Here is why the water matters.
The numbers below are only an illustration of the arithmetic, not a dose for anyone.
- A 10 mg vial mixed with 2 mL of water holds 10 ÷ 2 = 5 mg per mL.
- A 1 mg dose from that vial is 1 ÷ 5 = 0.2 mL.
- On a U-100 insulin syringe, 0.2 mL is 0.2 × 100 = 20 units.
If the next vial is mixed with 1 mL instead, it holds 10 mg per mL, and the same 1 mg is only 10 units. Same dose, half the units. If your log only says "20 units," you cannot tell which is right once the vial changes.
To check these numbers yourself, the free Peppy peptide calculator works out the concentration, the volume and the units from the vial strength, the water you added and the dose your provider gave you. It converts the numbers you enter and does not suggest a dose. The help guide on entering your vial and dose shows how those numbers go into Peppy.
Vials also have a clock. The same FDA page notes that it generally advises that multiple-dose vials of sterile medication be used within 28 days of first use, unless your instructions say otherwise. Note the date you first punctured each vial so you know when it is due to be thrown away.
Common injection tracking mistakes
- Logging later from memory. Times and sites blur within a day. Log right after the shot.
- Writing the dose in different units. Switching between mg and mcg invites a thousand-fold mistake. Pick the unit your provider uses.
- Only logging the good weeks. Late, skipped and partial doses are the entries your provider most needs to see.
- Dropping the site field. It is the first one people skip and the one that makes rotation work.
- Keeping records in three places. A note on your phone, a paper chart and a calendar entry will disagree sooner or later. Use one place.
How to make the habit stick
Tie the log to the injection itself. Some people keep the notebook next to the sharps container. Others log on their phone before they put the cap back on. The point is that the entry happens in the same minute as the shot.
Reminders help with both parts. A reminder for the shot keeps you on schedule. Logging right after the reminder fires keeps the record complete.
Once a month, look back over your entries. Count the on-time doses, the late ones and the missed ones. Look at which sites you used. Bring that summary to your next appointment, along with any notes about how you felt, and let your provider decide what, if anything, should change. If you think you had a reaction to a product, you can also report it to FDA MedWatch.
Keeping a record in Peppy
If a paper log keeps slipping, a peptide tracker app can hold the whole record in one place. Peppy is an iPhone app where you enter your vial strength, the water you mixed and the dose your provider gave you, and it shows that dose in units on your syringe each time you log it.
It can send dose reminders, keep a full dose history with missed and on-time doses, and track injection site rotation on a body map that shows which spots have rested. The vial tracker counts down what is left in each vial. There is no account to create, and your data stays on your iPhone and your own iCloud backup.
Disclaimer
This article is for informational purposes only and is not medical advice. Peppy does not sell peptides or medications and does not recommend any specific peptide or dose. Talk to your healthcare provider before starting, stopping or changing any treatment.
More from the blog

dose log6 min read
BPC-157 Tracker: Logging Injections, Sites and How You Feel
A practical guide to using a BPC-157 tracker: what to log at every injection, how to keep vial math straight and how to record sites and symptoms.
- dose log
- injection sites
- vials

tracking6 min read
Tesamorelin Research Explained: What Studies Show and What to Track
What FDA-approved tesamorelin studies show for HIV lipodystrophy, key limits of use, and what a peptide tracker app should record.
- tracking
- dose log
- vials

vials7 min read
How Long Does a Vial Last? A Peptide Vial Calculator Guide to Doses per Vial
Learn how to work out doses per vial and how long a peptide vial lasts, with worked examples, the 28-day rule and what to record.
- vials
- tracking
- dose log
