Blog / vials
How Long Does a Vial Last? A Peptide Vial Calculator Guide to Doses per Vial
Learn how to work out doses per vial and how long a peptide vial lasts, with worked examples, the 28-day rule and what to record.
By Peppy Team7 min read
If you track a peptide or a GLP-1 from a multi-dose vial, one question comes up again and again: how long will this vial actually last? Knowing the answer helps you plan refills with your provider, avoid a gap in your routine and keep honest records.
The good news is that the math is simple once you see how the pieces fit. This guide walks through the numbers step by step, shows where real life differs from the math, and explains what to write down. Every number below is an illustration only. Your vial strength, water volume and dose come from your label and your provider.
The Three Numbers You Need
To work out doses per vial, you only need three things:
- Total amount in the vial. This is printed on the label, usually in mg.
- The dose your provider gave you. This may be written in mg or mcg.
- How often you take it. Again, this comes from your provider, not from a chart online.
If your vial is a powder that you mix, you will also know how much water was added. That number changes the volume of each dose, but it does not change how many doses are in the vial. This trips a lot of people up, so it is worth repeating: adding more water makes each dose bigger in volume, not more doses.
Step 1: Count the Doses in the Vial
The core formula is:
Doses per vial = total mg in the vial ÷ mg per dose
Make sure both numbers use the same unit first. If your dose is in mcg, divide it by 1,000 to get mg.
Worked example (illustration only)
- Vial label: 10 mg total
- Dose written by a provider: 0.5 mg
- 10 ÷ 0.5 = 20 doses on paper
Second example with mcg (illustration only)
- Vial label: 5 mg total
- Dose written by a provider: 250 mcg, which is 0.25 mg
- 5 ÷ 0.25 = 20 doses on paper
Notice that the water volume never appears in this step. Whether the 10 mg vial was mixed with 1 mL or 2 mL, it still holds 10 mg of peptide.
Step 2: Turn Doses Into Days or Weeks
Once you know the dose count, multiply by how often you take it.
- Once weekly (illustration only): 20 doses × 7 days = about 140 days on paper.
- Once daily (illustration only): 20 doses = about 20 days on paper.
This is the "runway" of the vial. It is a useful planning number, but it is not the full story, because two real-world limits usually cut it shorter.
Step 3: Check the 28-Day Rule
Multi-dose vials do not stay usable forever once opened. The CDC's injection safety guidance says an opened multi-dose vial should be dated and discarded within 28 days, unless the manufacturer states another date for that opened vial. It also says this date should never go past the original expiration date on the label.
The FDA says the same thing in plain terms on its page about concerns with unapproved GLP-1 drugs. It advises using multi-dose vials within 28 days after first use because the contamination risk goes up after that, even if medication remains in the vial.
This changes the math a lot. Go back to the weekly example. On paper the vial holds about 140 days of doses. In practice, if the 28-day limit applies, you would only use around four or five doses before the vial should be discarded. The rest is not "extra." It simply cannot be used safely past that date.
So the real answer to "how long does a vial last" is the shorter of two numbers:
- The math runway (doses × frequency)
- The time limit after first use (often 28 days, or what the manufacturer states)
If your vial will hit its date limit long before it runs out, that is worth raising with your provider or pharmacist. They can tell you whether a different vial size or set-up fits your plan.
Step 4: Allow for Real-World Loss
Even within the date limit, you rarely get every last drop. A few things eat into the count:
- Dead space. A small amount of liquid stays in the needle hub and syringe after each draw.
- The last bit in the vial. It is hard to pull the final portion cleanly, especially with a short needle.
- Air bubbles and re-draws. Pushing liquid back and redrawing can waste a little each time.
- Spills or a dropped vial. It happens, and it is worth logging when it does.
Because of this, it helps to plan for one or two fewer doses than the math says. If the math says 20, think of it as 18 or 19 for planning. That small buffer keeps you from running short the week before a refill.
Why the Water Volume Still Matters
Water does not change the dose count, but it does change what you see on the syringe. Here is the same 10 mg vial mixed two ways, as an illustration only:
| Water added | Strength | 0.5 mg dose in mL | On a U-100 syringe |
|---|---|---|---|
| 1 mL | 10 mg/mL | 0.05 mL | 5 units |
| 2 mL | 5 mg/mL | 0.1 mL | 10 units |
On a U-100 insulin syringe, 100 units equals 1 mL, so 0.1 mL is 10 units. Both rows give 20 doses. The only difference is how far you draw the plunger. Small volumes are harder to measure precisely, which is one reason a provider may suggest a particular amount of water. The FDA has also warned that confusion between mL, mg and units has led to dosing errors, so it pays to double check every number on your record.
Using a Peptide Vial Calculator
You can do all of this with a pencil, but a peptide vial calculator saves time and reduces slips. Peppy's free peptide calculator lets you enter the vial size, the bacteriostatic water you added and the dose your provider gave you, in mg or mcg. It then shows the strength in mg/mL, the volume, the units to draw on your syringe and the number of doses per vial.
Any pre-filled value you see there is a placeholder, not a recommendation. Always replace it with the numbers on your own label and from your own provider. For a deeper look at the water side of the math, see our guide on entering your vial and dose.
What to Record for Every Vial
Good records make runway planning easy and give your provider a clear picture. For each vial, write down:
- Date opened or mixed. This starts the clock on the 28-day limit or the manufacturer's date.
- Discard-by date. Write it on the vial and in your log.
- Label strength and water added. So you can recheck the math later.
- Doses taken from this vial. A running count shows how close you are to empty.
- Any waste or spills. So a short vial does not look like a missed dose.
- Expiration date on the box. The opened date can never push past it.
Keeping a Record in Peppy
If you track doses on your iPhone, Peppy's vial tracker keeps a stash of what is left per vial, how many doses remain and a rough runway. It can remind you when a vial is running low or close to expiring, and the dose history shows each dose you logged, missed or took on time. Your data stays on your iPhone and your own iCloud backup, with no account needed. If you are on a weekly GLP-1, the GLP-1 tracker page explains how it fits a weekly routine.
Quick Recap
- Doses per vial = total mg ÷ mg per dose. Water does not change the count.
- Multiply by frequency to get the math runway.
- The real limit is the shorter of the runway and the date limit after first use, often 28 days.
- Plan for a little loss from dead space and the last draw.
- Record the open date, discard date, strength and running dose count for every vial.
Disclaimer
This article is for informational purposes only and is not medical advice. Peppy does not sell peptides or medications and does not recommend any specific peptide or dose. Talk to your healthcare provider before starting, stopping or changing any treatment.
More from the blog

tirzepatide6 min read
Tirzepatide mg to Units: How to Read Your Syringe Step by Step
How tirzepatide mg to units math works, with worked examples, syringe tips and what to record in your tracker so every dose matches your provider's plan.
- tirzepatide
- glp 1
- vials

titration6 min read
Retatrutide Tracker: How to Keep Clean Records While You Titrate
A practical retatrutide tracker guide: what to log at each weekly shot, what to note at every dose step, and how vial unit math works.
- titration
- dose log
- glp 1

vials6 min read
How to Reconstitute BPC-157 and Calculate Units, Step by Step
A plain guide to BPC-157 reconstitution: label checks, mixing steps, unit math with worked examples, common mistakes and what to record each time.
- vials
- dose log
- tracking
