Blog / dose log
BPC-157 Tracker: Logging Injections, Sites and How You Feel
A practical guide to using a BPC-157 tracker: what to log at every injection, how to keep vial math straight and how to record sites and symptoms.
By Peppy Team6 min read
If you use BPC-157 under a provider's care, the injections themselves are only part of the routine. The other part is the record. A good BPC-157 tracker keeps every shot, every injection site and every note about how you feel in one place, so you and your provider can look back at real data instead of guesses.
This guide walks through what to log, how to keep the vial math straight and how to turn a few weeks of notes into something useful at your next appointment.
Why a BPC-157 tracker matters more than most
BPC-157 is different from a prescription pen like semaglutide. There is no pharmacy label telling you the strength of each click. It usually comes as a powder in a vial that has to be mixed with water before use, and the amount in each syringe depends on how it was mixed.
The evidence base is also thin. A 2026 systematic review of human evidence for BPC-157 found only three small human studies, with 30 people in total, and rated the certainty of evidence as very low. The FDA has also noted that it has no, or only limited, safety information on BPC-157 for the routes people use.
When the research is this limited, your own record carries more weight. It is the clearest way for your provider to see what you actually did and how it went.
What to log at every injection
Keep each entry short. You want something you will actually fill in every time, not a diary you abandon after a week.
The basics
- Date and time. Write the real time, not the planned time.
- Dose. The dose your provider gave you, in mg or mcg, written the same way every time.
- Units drawn. The number of units on your syringe for that dose.
- Syringe size. A 0.3 mL, 0.5 mL or 1 mL syringe. The marks are spaced differently on each.
- Vial. Which vial you drew from, especially if you have more than one open.
The injection site
- Where you injected. For example, left lower abdomen or right thigh.
- How the site looked afterward. Redness, a bump or nothing at all.
How you feel
- The reason you are using it. Your provider may ask you to rate the issue you are tracking, such as joint or tendon discomfort, on a simple 0 to 10 scale.
- Anything new or unusual. Write it down even if it seems minor. Your provider decides what it means.
That is it. Five to ten seconds per entry once it becomes a habit.
Keep the vial math straight
Most mistakes with powdered peptides happen before the needle goes in. The units you draw depend on two numbers: how much peptide is in the vial and how much water was added.
Here is how the math works. The numbers below are only an illustration of the arithmetic, not a dose for anyone.
- Concentration. A 5 mg vial mixed with 2 mL of water holds 5 ÷ 2 = 2.5 mg per mL.
- Volume. A 0.5 mg dose would be 0.5 ÷ 2.5 = 0.2 mL.
- Units. On a U-100 insulin syringe, 0.2 mL is 0.2 × 100 = 20 units.
Now change one number. If the same 5 mg vial were mixed with 1 mL instead, the concentration would be 5 mg per mL, and the same 0.5 mg would be only 10 units. Same dose, half the units.
That is why your log should record the water volume for every new vial. If a new vial is mixed differently, the units change, and your old notes no longer match.
Watch out for mg and mcg too. 1 mg is 1,000 mcg, so a dose written in the wrong unit is off by a factor of a thousand.
If you want to check the numbers, the free Peppy peptide calculator does these three steps from the vial strength, the water you added and the dose your provider gave you. It only converts the numbers you enter. It does not suggest a dose.
Track your vials, not just your doses
A vial log answers questions that a dose log cannot. Record these for each vial:
- Vial strength as printed on the label.
- Water added and the date you mixed it.
- Discard date from your provider or pharmacy instructions.
- Doses used so far.
With those four numbers you can see roughly how many doses are left and when the vial needs to be replaced. You also avoid using a mixed vial past the date you were told to stop. A vial tracker makes this automatic, but a simple table works too.
Rotate and record injection sites
Using the same spot over and over can leave the skin sore or lumpy. Many people who inject regularly rotate between areas, such as the left and right abdomen and thighs.
Rotation only works if you remember where you went last. Writing the site down at every shot solves that. Over a few weeks, the log also shows patterns. If one area keeps getting red, that is worth showing your provider.
A body map makes this easier than a written list. Peppy has an injection site rotation view that shows which sites have rested and suggests the next one.
Notes on how you feel
This is the part people skip, and it is often the most useful.
Pick one or two things to rate, and rate them the same way each time. A 0 to 10 scale is simple and easy to compare. Rate on the same days each week so the numbers line up.
Add a short note when something changes. "Knee stiff after a long walk" is more helpful than "bad day."
Do not try to interpret the trend yourself. Bring it to your provider and let them judge it. If you notice anything that worries you, contact your provider. You can also report a suspected reaction to a product through FDA MedWatch.
Common tracking mistakes to avoid
- Logging later from memory. Times and sites get mixed up fast. Log right after the shot.
- Forgetting the water volume. Without it, units from different vials cannot be compared.
- Changing the rating scale. Switching from 0 to 10 to "good or bad" breaks the trend.
- Mixing mg and mcg. Pick one unit and stick with it in every entry.
- Leaving out missed doses. A missed dose is data too. Write it down instead of leaving a gap.
What to bring to your appointment
A clean record turns a vague check-in into a useful one. Before each visit, pull together:
- The dates and times of every dose, including any you missed.
- The dose and units for each entry.
- Vial details: strength, water added and mixing dates.
- A list of injection sites and any reactions.
- Your weekly ratings and short notes.
Your provider can then compare what was planned with what actually happened.
Keeping a record in Peppy
If paper or spreadsheets keep slipping, a peptide tracker app can hold all of this in one place. Peppy is an iPhone app where you enter your vial strength, the water you mixed and the dose your provider gave you, and it shows that dose in units on your syringe. It can send dose reminders, count down what is left in each vial, rotate injection sites and keep a full dose history to show your provider.
You can also log side effects next to your doses. The weight, side effects and history guide shows how that works. There is no account to create, and your data stays on your iPhone and your own iCloud backup.
Disclaimer
This article is for informational purposes only and is not medical advice. Peppy does not sell peptides or medications and does not recommend any specific peptide or dose. Talk to your healthcare provider before starting, stopping or changing any treatment.
More from the blog

dose log6 min read
Injection Tracker: Why Logging Every Shot Matters, and What to Log
A practical injection tracker guide: why logging every shot helps, what to record for pens and vials, and the tracking mistakes to avoid.
- dose log
- injection sites
- vials

tracking6 min read
SS-31 Research Explained: What Elamipretide Studies Show and What to Track
What human trials of SS-31 (elamipretide) report, what the 2025 FDA decision means, and what to keep in your peptide tracker.
- tracking
- dose log
- injection sites

tracking6 min read
CJC-1295 and Ipamorelin Research: What Studies Show and What to Track
What published research on CJC-1295 and Ipamorelin reports, where the evidence is thin, and what to log in a peptide tracker under a provider's care.
- tracking
- dose log
- vials
