Blog / tracking
How Many Units of Retatrutide? mg to Units, Explained Step by Step
How to turn a retatrutide dose in mg into units on a U-100 syringe, with worked examples, common mistakes and what to log each time.
By Peppy Team6 min read
If you have a retatrutide vial and a dose written down in milligrams, the syringe in your hand speaks a different language. It is marked in units. Getting from one to the other is simple math, but it is also the step where small slips turn into big errors. This guide walks through how retatrutide units work, with worked examples you can check by hand, and what to write down so every dose matches the plan your provider gave you.
First, a quick note on what retatrutide is
Retatrutide is an investigational once-weekly injection made by Lilly. According to Lilly's retatrutide FAQ, it is a single molecule that acts on three hormone receptors (GIP, GLP-1 and glucagon), it is still in Phase 3 clinical trials, and it has not been approved by the FDA or any other regulator. The earlier phase 2 obesity trial published in the New England Journal of Medicine also gave it as a weekly subcutaneous injection.
That status matters for this topic. Because there is no approved product, there is no approved pen with a fixed dose built in. Anyone talking about retatrutide units is usually talking about a vial and an insulin syringe, which is exactly where the math comes in.
Why units and milligrams are different things
A milligram (mg) measures the amount of drug. A unit on an insulin syringe measures volume. On the common U-100 insulin syringe, 100 units equals 1 mL, so 1 unit is 0.01 mL.
That means a unit does not hold a fixed amount of retatrutide. How much drug is in each unit depends on how much liquid is in the vial. The same dose in mg can be 10 units in one vial and 20 units in another. This is the single most important idea in this post.
The three-step math
Every mg to units conversion uses the same three steps.
- Concentration. Divide the total mg in the vial by the mL of liquid in it. This gives mg per mL.
- Volume. Divide the dose your provider gave you (in mg) by the concentration. This gives mL.
- Units. Multiply the mL by 100. This gives units on a U-100 syringe.
Written as one line: units = (dose in mg ÷ concentration in mg/mL) × 100.
Worked examples (illustrations only)
The numbers below are only there to show the arithmetic. They are not a suggestion of what anyone should take. Use the vial strength on your label, the liquid you actually have in the vial, and the dose from your provider.
Example 1: a 10 mg vial with 1 mL of liquid
- Concentration: 10 mg ÷ 1 mL = 10 mg/mL
- For an example dose of 1 mg: 1 ÷ 10 = 0.1 mL
- Units: 0.1 × 100 = 10 units
Example 2: the same 10 mg vial with 2 mL of liquid
- Concentration: 10 mg ÷ 2 mL = 5 mg/mL
- For the same example dose of 1 mg: 1 ÷ 5 = 0.2 mL
- Units: 0.2 × 100 = 20 units
Same vial, same dose, twice the units. Nothing about the dose changed. Only the water did. This is why you should never copy a unit number from a friend, a forum or an old vial without checking how that vial was mixed.
Example 3: working in mcg
Sometimes a dose is written in micrograms (mcg). 1 mg is 1,000 mcg. So an example dose of 500 mcg is 0.5 mg. In the 5 mg/mL vial from Example 2, that is 0.5 ÷ 5 = 0.1 mL, or 10 units. Always convert mcg to mg before you divide, or your answer will be off by a factor of 1,000.
Counting doses in the vial
The same numbers tell you roughly how long a vial lasts. Divide the total mg in the vial by the dose in mg. A 10 mg vial divided by an example dose of 1 mg gives 10 doses, before any loss in the needle or the vial. When the dose changes, that count changes too, so recalculate it each time.
Reading the syringe
Insulin syringes come in a few sizes, and the markings differ:
- 0.3 mL (30 units): marked every 1 unit, often with half-unit lines. Easiest for small draws.
- 0.5 mL (50 units): marked every 1 unit.
- 1 mL (100 units): usually marked every 2 units, so odd numbers sit between lines.
If your answer is 15 units and you are using a 1 mL syringe, you are reading between two marks. A smaller barrel makes that easier. Use the syringe you were given, and ask your provider or pharmacist if you are unsure how to read it.
Common mistakes to avoid
The FDA has reported adverse events linked to dosing errors with injectable GLP-1 drugs, where patients measured the wrong amount and, in some cases, professionals miscalculated. Most of these slips fall into a few patterns.
- Mixing up mg and mcg. A thousandfold error is easy to make and hard to notice.
- Treating the vial strength as the dose. A 10 mg vial is the total in the bottle, not the amount per injection.
- Forgetting the liquid changed. A new vial mixed with a different amount of water needs new math.
- Reading mL as units. 0.2 mL is 20 units, not 2.
- Using a syringe that is not U-100. U-40 and U-50 syringes exist. Check the box before you trust any unit number.
- Rounding without saying so. If you round to the nearest mark, write that down.
The same FDA page also notes that multi-dose vials are generally meant to be used within 28 days after first use, which is worth knowing when you count doses per vial.
Checking the numbers with a free tool
Doing the math by hand once is the best way to understand it. Checking it every week is where a tool helps. Our free peptide calculator takes the vial strength, the water you added and the dose your provider gave you, and shows the volume in mL, the units on a U-100 syringe and the nearest mark on the barrel you pick. It only converts the numbers you enter and never suggests a dose. For a step-by-step setup in the app, see how to enter your vial and dose.
What to write down every time
A clean record makes the math easy to check later and easy to share with your provider. For each dose, note:
- Date and time
- Vial strength (mg) and liquid added (mL)
- The dose your provider gave you, in mg
- The units you drew and the syringe size
- Injection site
- Any side effects or notes
Also log the date you mixed each vial, so you know when it is due to be discarded.
Keeping a record in Peppy
Peppy is a peptide tracker app for iPhone that keeps this record for you. You enter the vial strength, the water you mixed and the dose your provider gave you, and it shows that dose in units on a 0.3, 0.5, 1 or 3 mL syringe each time you log it. It also tracks doses left in each vial, sends dose reminders and keeps a full dose history you can bring to appointments. If your provider steps your dose up over time, you can record those steps as a titration schedule so the units update when the dose does. Your data stays on your iPhone and your own iCloud backup.
The short version
Units measure volume, not drug. To turn retatrutide mg into units, divide the vial's mg by its mL, divide the dose by that number, then multiply by 100. Recheck the math whenever the vial, the water or the dose changes, and confirm every number with your provider.
Disclaimer
This article is for informational purposes only and is not medical advice. Peppy does not sell peptides or medications and does not recommend any specific peptide or dose. Talk to your healthcare provider before starting, stopping or changing any treatment.
More from the blog

vials7 min read
How Long Does a Vial Last? A Peptide Vial Calculator Guide to Doses per Vial
Learn how to work out doses per vial and how long a peptide vial lasts, with worked examples, the 28-day rule and what to record.
- vials
- tracking
- dose log

tirzepatide6 min read
Tirzepatide mg to Units: How to Read Your Syringe Step by Step
How tirzepatide mg to units math works, with worked examples, syringe tips and what to record in your tracker so every dose matches your provider's plan.
- tirzepatide
- glp 1
- vials

reminders6 min read
Dose Reminders for Weekly GLP-1 Shots: How to Set Them Up So They Stick
Practical ways to set dose reminders for a weekly GLP-1 shot, plan around travel and busy weeks, and keep a clean record in a GLP-1 tracker app.
- reminders
- glp 1
- dose log
